Grease Guns & Accessories
|
Image
|
Description
|
Price
|
Alemite 585-B 14.4v Grease Gun
|
Develops 10,000 PSI
3 way loading - 14 oz Cartridge
3' Flexible Hose extension - 10,000 psi
5.25 oz / min @ 1000 PSI delivery stroke
Includes 120 v charger with two 14.4 v batteries
One fully charged battery delivers up to 10 cartridges of
grease
One year warranty
|
$389.00
|
Alemite 550 Pistol Grip Grease Gun
|
The Alemite 550 Pistol Grip Grease Gun provides easy, on-hand
operation and come with an 18" flexible hose and coupler.
Develops 5,500 psi
Delivery: 1 oz of grease per 33 strokes in high volume mode;
1 oz of grease per 63 strokes in high pressure mode
Unique dual leverage allows choice between high pressure
or high volume output
Three-way loading – 14 oz cartridge, suction or fast
refill from Alemite loader pump through loader fitting up
to 16 oz
Air vent (bleeder valve)
Vinyl handle cover provides a sure grip
|
$69.95
|
Alemite Parts
|
| |
|
|
Part #
|
Description
|
Price
|
|
550
|
Professional Dual Leverage Pistol Grip
|
$69.95
|
|
F331035
|
Grease Gun Holder
|
$12.95
|
|
339812
|
Carrying Strap
|
$14.95
|
|
B-200A
|
Small Injector Needle
|
$9.95
|
|
B-203
|
90° Grease Coupler
|
$17.95
|
|
B322610
|
Loader Fitting
|
$9.95
|
|
308730-A
|
Small Coupler
|
$11.95
|
|
6304-C
|
Large Hydraulic Coupler
|
$13.95
|
|
340338
|
Pressure Relief Valve for 12 & 14.4 volt
|
$39.95
|
|
339804
|
12 volt batter
|
$76.00
|
|
339989
|
14.4 volt battery
|
$86.00
|
|
336523
|
Gasket
|
$8.95
|
|
339997
|
12 volt mobile charger
|
$83.00
|
|
339998
|
14.4 volt mobile charger
|
$86.00
|
|
340067
|
3ft 10,000 PSI Whip Hose
|
$44.95
|
|
Grease Buster Tool™
|
Cleans grease fittings and bearings using oil solvent and
hydraulic pressure.
Using Grease Buster tool without any fluid voids any warranty.
We will attempt to repair at owner's expense.
1. Pull piston out of cylinder
2. FILL cylinder with solvent (NO aerosol can lube)
3. Snap tool onto grease fitting
4. Tap piston with 1/2 to 1 pound hammer
5. Tip may be looened 1/1 turn left to loosen pressure
lock. Keep tip tight at all other times.
6. Use Teflon tape on the threads of combinational model.
Repitition of hitting piston is much more important than
one or two hard hits. (You may bend the piston if you attempt
to FORCE the piston past the stop.)
|
Part #
|
Description
|
Price
|
|
GB-2
|
Large
|
|
|
GB-2E
|
c/w extension
|
|
|
GB-E
|
extension (flexible high pressure hose)
|
|
|
| |
|
|
|
